Fiberglass vs. Rigid Foam Insulation comparison in Thomasville, GA

How Fiberglass and Rigid Foam Insulation materials compare

Home insulation helps reduce convective and conductive heat flows, making your home comfortable all year long. Convective heat from the sun circulates through liquids and gases, which conductive heat moves through materials such as the wall, ceiling, and floor. Ceiling your home’s interior with insulation helps reduce this heat flow, affecting how your home heats and cools. It ends up reducing your heating and cooling costs.

Heat generally flows from hot spaces to unheated ones. It means that in winter, hot air flows from the house to the environment, while in summer, heat will naturally move from the outdoor spaces to the interior spaces of the house, where it is cooler. This heat moves through the foundation walls, radiant heat floors, ceiling cavities, wall cavities, window, and door frames. Proper insulation of interior and exterior walls can reduce this heat flow and increase your home’s energy efficiency.

Different types of insulation materials

Different insulation materials have different thermal resistance values (R-values). The material’s thickness and density determine the R-value. Thermal barrier systems with higher insulating values are more effective than those with lower insulating values. You can increase the insulating value by adding multiple layers.

The most common insulation materials in the US include:

  • Fiberglass insulation
  • Mineral wool
  • Cellulose insulation
  • Polyurethane foam
  • Polystyrene (EPS)

Different surfaces require insulation materials of different R-values. Some spaces require high R-value insulation materials, while others need a low R-value material. The local climate can dictate the R-value needs of your home. This article will look at how fiberglass and foam insulation materials compare.

Fiberglass Insulation vs. Rigid Foam Insulating values

R-values of insulation materials determine how strong and capable they are to resist heat loss or transfer. Materials with a higher R-value trap heat better, regulating your home’s temperatures during winter and summer. Different states recommend using materials of specific R-values on other spaces depending on the local climate and the material’s strengths.

Fiberglass has an R-value of R-2.9 to R-3.8 per inch, while rigid foam has an R-value of R-3.6 to R-6.3 per inch. Spray foams are a form of low-density rigid foam insulation material with an R-value of about R-3.6.

Fiberglass Insulation vs. Rigid Foam Installation

There are various installation techniques for different insulation materials. These include:

  • Batt and roll
  • Loose-fill
  • Blown-in techniques
  • Sprayed foam

The most popular method for installing fiberglass is batt or blown-in insulation. Fiberglass installation requires the use of an adhesive binder to hold the rolled-up sheets of fiberglass in place.

Since fiberglass is made of fine glass fibers, woven silicon, and glass powder, you need to wear protective equipment when handling fiberglass batts to protect your skin, eyes, and lungs.

You will need to use multiple layers for maximum insulation value on each surface until you achieve the recommended R-value according to local insulation codes.

Rigid foam is a lightweight, fire-resistant insulation material. Low-density material that is sprayed into surfaces to seal them. Spray foam insulation helps seal air pockets on wall surfaces, offering maximum protection against moisture, heat, and pests.

Fiberglass Insulation vs. Rigid Foam costs

Fiberglass is among the most popular and affordable insulating materials. Professional spray foam insulation will cost you up to $1.50 per sqft, while DIY kits of open cell and closed cell spray foam will cost $300-$600. Professional rigid foam installation, on the other hand, costs $3.95-7.20 per square foot.

Rigid Foam vs Fiberglass application

Fiberglass is a non-flammable, environment-friendly insulating material popular in new constructions and home improvement projects. Its water-resistant, shrink-proof qualities make it suitable for sealing expansive areas with joists. It contains a polymer that hinders mold and mildew from growing inside the insulation.

The most popular method for installing loosely packed fiberglass is batt or blow-in techniques. You will use an adhesive binder to hold the rolled-up sheets of spun fiberglass fibers in place. Blown-in fiberglass can fill thin gaps around your plumbing system, wiring, window, and door frames. It is also ideal for wall cavities, attic floors, and foundation walls. Batt insulation technique can help you seal ceiling, foundation wall, and other unobstructed surfaces with fiberglass.

You can also use fiberglass for:

  • Acoustic insulation
  • Ventilation duct insulation

On the other hand, Rigid foam is a flammable, non-environment friendly material mainly used for insulating and soundproofing commercial properties. It comes in two forms, lightweight open-cell foam and high-density closed-cell foams. Expandable foam is popular for insulating walls, basement cavities, ceiling cavities, and any other surface that other insulating materials could not handle. It, however, shrinks and thus requires an experienced hand to install.

Rigid foam performs well on foundation floors and porous concrete walls to reduce air leaks.

Want to make your Thomasville, GA, home energy efficient? Call Efficiency Plus insulation contractors on 229-403-9486

Energy Efficiency Plus + is an insulation contractor based in Thomasville, GA. We offer spray foam insulation and fiberglass insulation solutions for residential and commercial properties. Whether you want to insulate a new construction, repair an existing structure, or restore your property after water damage, we have the right insulation materials and qualified technicians to help you out.

We offer maximum insulation against air leaks, moisture leaks, and heat loss through our high-quality interior and exterior insulation solutions. We are familiar with all of Thomasville’s insulation codes and guarantee you quality work.

Our crew uses the best practices to install a superior thermal barrier in the following areas:

  • Slab floor
  • Garage
  • Foundation wall
  • Ceiling
  • Concrete block walls
  • Attic
  • Band joists and seams
  • Windows
  • Doors
  • Ducts
  • Exterior wall surfaces
  • Basement masonry walls
  • Crawlspace, among others.

Protect your home and keep your energy bills low through our professional insulation services. Call us today on 229-403-9486 for a free estimate.

Leave a Reply

Your email address will not be published. Required fields are marked *